Using NIOS II at Home

All students should install this software at home. That way you can write and compile programs for your labs. If you've purchased a DE1_SoC you can even run it and debug it at home. To download the software follow the Installation below.

Downloads

• Make sure you have installed Quartus II Web Edition and NIOS II EDS on your computer. If not follow instructions at the Quartus at home page

  Follow these instructions to install Monitor Program;

• Go to the main Altera web page Altera home page
• Select Support> Unversity Programs at the top of the web page.
• Select Altera Monitor Program, which is towards the bottom of the web page.
• Select Unversity Program Installer, Make sure to select the latest version.
• Select EXE under download and opposite (University Programer Installer (Windows)).
• A file called altera_upds_setup.exe will appear on your screen.
• Save this file to your computer. Once downloaded run the .exe file. Once the program has been loaded you have completed the installation of monitor program and can program the NIOS II processor.
• If needed, download and install the USB-Blaster driver from Altera's Driver webpage